Detailed Product Description

                        MMT-110/220DP20AL

Size:150*115*60(mm)

Direct-current servo driver instruction for use  

First, outline:

 this servo driver uses the omni-directional protection design, has the high efficiency transmission performance: The control precision is high, linear good, the movement steady, reliable, the response time quick, uses characteristics and so on entire isolation mode control, especially has the high torque and the good performance under the slow-speed of revolution movement, not brushes the servo under certain situations and the exchange to compare can demonstrate that its outstanding characteristic, and widely applies on each gearing equipment.

Second, product characteristic:

PWM controls the H bridge to actuate

Four quadrant working pattern

entire isolation way designs

linear, control precision high

zero drifting minimum

rotational speed closed loop feedback voltage rank to be possible well to choose

standard signal connection to input 0--±10V

when switch quantity commutation function

zero signal motor locking function

on/under spacing protection function t

enables the control function

on/under limited velocity to establish

output current hypothesis function

Has the pressure, the overflow, warm, the output to short-circuit, the motor to be excessively warm, the feedback exceptionally and so on protections and the warning function

Third, major technique parameter

control supply voltage AC:

110 series:   AC: 110V±10%  

220 series:   AC: 220V±10%

main supply voltage AC:

110 series:   AC 40----110V 

220 series:   AC50---- 220V

output voltage DC:

110 series: 0-130V or other voltages may establish

      220 series: 0-230V or other voltages may establish the

specified output electric current: 

DC 5A (maximum output electric current 10A)             

 DC 10A (maximum output electric current 15A)

      DC 20A (maximum output electric current 25A)

    control precision: 0.1%

input demand signal: 0-±10V

measures the fast feedback voltage:

7V/1000R      

9.5V/1000R  

13.5V/1000R     

20V/1000R  

may the film threading designate and may accept other specifications order by way of the PC board in

Fourth, installs the environment request:

ambient temperature: - 5? C ~ +50? C

ambient humidity: Relative humidity ≤80RH. (does not have condensation)

to avoid having the corrosion gas and under the ignitable gas environment uses

to avoid having the dust, to be possible electric conduction powder froth many situation

to avoid the water, the oil and other liquids enters driver interior

to avoid vibrating or the hit situation uses

to avoid ventilating the bad situation to use

........