Detailed Product Description

  DC MOTOR DRIVE (with full-wave control)

i.    Product Characteristics:

     SMT technology is adopted. It features small size and light weight.

     Applicable to permanent-magnet, separate excitation DC motor.

     Dual closed loop PI adjustment (Current and Voltage)

     Large torque for low-speed start-up.

     It has relatively hard mechanical features. The static-state error ratio is 1%.

     Wider speed adjusting range

     Faster dynamic response process

     Automatic and smooth transition process during acceleration and deceleration.

     Current setting and current limiting protection (If the preset current value is exceeded, the driver stops output automatically.)

     Upper range/lower range speed can be adjusted at will.

     Soft starting/stopping time setting function. (0.2-15s)

     Keyboard lock-up function.

     Output current inspection function: The driver monitors the real time output current automatically. If the current acts abnormally or exceeds the set value, driver will automatically stop the output and maintain the fault state.

     Input and output voltage can be selected.

ii.   Main Parameters:

      Input VoltageAC: 220V±10% Optional

     Output VoltageDC: 0-220V or other voltages

     Output CurrentDC: 10A

     Output Voltage Accuracy: ≤1%

     Given Input Signal:  0-5V   0-10V  potentiometer 10K/2W   

     Ambient Temperature-10ºC~+60ºC

     Ambient HumidityRelative Humidity≤80RH.Below dew point