Detailed Product Description

The servo drive adopts all-round protection design and has efficient transmission functions: high control precision, good line shape, stable and reliable operation, quick response time and complete isolation control and other features. It has high torque and fine performance especially at lower revolution speed. Compared with AC brushless servo, its excellent characteristics can show more in certain occasions and is widely applied to various

transmission mechanical equipments.

PWM (pulse width modulation)   H bridge driving

Four quadrant working mode

Complete isolation design

Fine output line High control precision

Small zero drift

Selectable voltage grade of rotational speed feedback

Standard signal interface input 0--±10V

Reversing function of switch value

of motor at zero signal

Protective function of upper/lower limit position

Enabling control

Setting of higher and lower speed limit

Setting function of output current

Protection or alarming in such circumstances as over voltage, overcorrect, short circuit, excessive temperature, abnormal feedback, etc.

Control source voltage ACDC::

ACDC 18-36V±10%  

Output voltage DC0-36V or other voltage can be set

Rated output current:  DC  5AMaximum output current 10A 

DC  10AMaximum output current 15A

DC  20AMaximum output current 25A

Output Voltage Accuracy0.1%

Given input signal 0±10V

Speed feedback voltage

7V/1000R        9.5V/1000R  

13.5V/1000R     20V/1000R  

Can be chosen via film threading in PC board and other specification setting is acceptable.

Environmental temperature-5ºC ~ +50ºC

Environmental temperatureRelative humidity≤80RH (without dew)

Avoid environment with corrosive gas and

Avoid occasions with dust and conductive electrical dust

Prevent water, oil and other liquid entering the interior of drive

Avoid using in shaking and striking circumstances

Avoid using on occasions with inadequate ventilation

The drive system power supply:U1 V1  are power supply input, and U2 and V2 are not connected. See Table 1:

                          Table 1

Note

1. When the input voltage is higher than the highest rated voltage driver (this series products   input maximum voltage AC, DC: 32V, driver will protection stop as over-voltage O.V  light is on). When this occurs, immediately cut the power supplies, otherwise it will burn inside drives power components.

2. When the drive power under minimum rated voltage (the series of products minimum input voltage is AC, DC: 20V), otherwise drive will be deemed owe  over-voltage or power to stop, and protect (T.F panel light is on). When this occurs, cut off the power supply should immediately, otherwise the drives or motor will appear abnormal phenomenon.

3. The front input terminal of power supply preferably takes isolation measures.

Please pay attention to the input range of system control power supply. If the input power exceeds the specified range, the components inside system will be burned out; if the input power is lower than the specified range, the system can not work properly or the motor will shakes.

4. The driver internal with multiple anti-interference and clutter absorption measures, but in order to make the system more reliable work, still need to avoid the influence of the bad power environment, namely taken the anti-interference measures.

Such as:

(1) All the control signal should be with the Lord, motor power respectively.

(2) Good grounding shell drives.

(3)The external connect Signal isolator